This ultrasonic composite horn / sonotrode is properly the largest ever designed in 20 kHz, with the massive welding aria on 320 x 280mm. Email : info@sonic-power.com The ultrasonic composite horn / sonotrode is actually a half-wave coupled horns / sonotrode with two or more half-wave, tuned horns attached to it. This technology was first...
This ultrasonic composite horn / sonotrode is designed in 23 kHz, with similar amplitude as 20 kHz, but the huge advantage of little sound to be heard in welding Email : info@sonic-power.com The ultrasonic composite horn / sonotrode is actually a half-wave coupled horns / sonotrode with two or more half-wave, tuned horns attached to...
This ultrasonic composite horn / sonotrode is designed in 25 kHz, with similar amplitude as 20 kHz, but the huge advantage of very little sound to be heard in welding Email : info@sonic-power.com The ultrasonic composite horn / sonotrode is actually a half-wave coupled horns / sonotrode with two or more half-wave, tuned horns attached...
Ultrasonic Twin Head Sonotrode 25 kHz lenght 300 mm, with dual ultrasonic transducers, for ridgid mount The World of Ultrasonic horns – Sonotrodes Email : info@sonic-power.com The World of Ultrasonic horns Ultrasonic horns is a device commonly used for augmenting the oscillation displacement amplitude provided by an ultrasonic transducer operating at the low end of...
Ultrasonic Titanium block horn 240 x 180mm, 20 kHz. Email : info@sonic-power.com Machined from aluminum or titanium, these horns are available up to 9″ x 12″. They require higher power units to run efficiently. This Large titanium block horn is designed to have almost uniform amplitude across the entire surface, thus the weight of the...
An ultrasonic rotary horn intended to be excited at a frequency of from about 18 to about 60 kHz, which horn is a shaped, solid object having a rotational axis and a radial surface terminated by a first end and a second end. Email : info@sonic-power.com The horn is racially symmetrical. The thickness of the...
Ultrasonic Titanium horn Ø 200mm, 25 kHz. Email : info@sonic-power.com Machined from aluminum or titanium, these horns are available up to Ø 300mm. They require higher power units to run efficiently. The World of Ultrasonic horns – Sonotrodes Email : info@sonic-power.com The World of Ultrasonic horns Ultrasonic horns is a device commonly used for augmenting...
Ultrasonic food cutting knifes in titanium halfwave cutting hight. Email : info@sonic-power.com These are the main features with ultrasonic food cutting knife, Can be used in continiuesly cutting on lines, with high speed. No sticking to the ultrasonic blade / horn / knife / sonotrode Perfect clean cut surface Compact equipment with a wide range...
35 kHz Ultrasonic titanium welding horn welding surface 100 x 40mm, with uniform amplitude Email : info@sonic-power.com A bar horn is a rectangular horn that is either un-slotted or slotted only through the thickness. Special design techniques give optimum face amplitude uniformity. Bar horns generally has low-to-moderate gain (1:1 to 4:1). Bar horns are used...
Ultrasonic Aluminum Bar Horn / sonotrode 350 x 70mm, 25 KHz, with uniform amplitude. Email : info@sonic-power.com Our unique designed high power ultrasonic converter allows us to make horns / sonotrodes in higher frequencies than normally. This creates the advantage that no sound can be heard, we have named it “sound of silence” A bar...